在使用路沿石模具的时候可以提前进行加工场地的清理，一些细碎的石子或者是泥沙要清理干净，路沿石模具的硬度虽然是有着提高

When using roadside stone molds, the processing site can be cleaned in advance, and some fine stones or mud and sand should be cleaned up. Although the hardness of roadside stone molds is improved

但是长时间直接放置在地面上进行生产加工，就会造成路沿石模具底部磨损情况的加重，还会影响到路沿石的成型情况。

However, if placed directly on the ground for a long time for production and processing, it will cause increased wear on the bottom of the roadside stone mold and also affect the formation of the roadside stone.

为了改善这种情况，预支工厂一般都是会将路沿石模具的加工场地与其他模具加工场地进行区分，这样是为了保证好路沿石模具的加工状况。

In order to improve this situation, advance payment factories usually distinguish the processing site of roadside stone molds from other mold processing sites, in order to ensure the good processing condition of roadside stone molds.

               

塑料材质的路沿石模具不用单独进行组装，可以直接从仓库中取出直接使用，将模具简单擦拭干净后放置在地面上

Plastic roadside stone molds do not need to be assembled separately and can be directly taken out of the warehouse for use. Simply wipe the molds clean and place them on the ground

工人需要将工业机油均匀涂刷在模具的里面，让内腔更加光滑减少泥浆的粘连，等待凝固就可以了，生产的过程中尽量避免路沿石模具的移动。

Workers need to evenly apply industrial engine oil to the inside of the mold to make the inner cavity smoother and reduce mud adhesion. Wait for solidification and try to avoid the movement of the stone mold along the road during the production process.